 | You'll probably see more XD9000i winches on trail rigs than any other winch. No load line speed of 38-feet per minute and three-stage planetary gearing and the ability to run cool with low amp draw for long winching cycles are just a few reasons why. |
| |
| ADDITIONAL RESCUE REBATE
Save Up To $150 On WARN Winches
Now through December 31st, 2009
The WARN 9.5ti is 9500 lbs. of pulling capacity packed into a massive aluminum die-cast body. Sealed for extreme-duty water-resistance and powered by a new generation Bosch motor and controlled by WARN's first thermometric indicator that gives the operator motor operating temperature information. The thermometric indicator LED on the new handheld remote provides instantaneous operator feedback on motor temperature.
Wireless Remote Control System can be added which is also available separately. |
| |
| Warn Winches feature an automatic load holding brake, a three-stage planetary gearset with a Hawse Fairlead and heavy steel cable. A remote control with lead is also included. Requires mounting kit for installation (sold separately), unless used with Jeep Accessory Off-Road Front Bumper which includes an integral winch mount. |
| |
| ADDITIONAL RESCUE REBATE
Save Up To $150 On WARN Winches
Now through December 31st, 2009
Competitive rock crawling rigs need a low-profile, lightweight winch like the WARN 9.0Rc that delivers maximum power in a compact, 54-lb. unit. The 9.0Rc is a short-drum, 9,000 lb. capacity winch that features a 4.8 hp series wound motor with fast line speeds. An exclusive, multi-segment cam actuated brake gives positive operator control during winching. The 9.0Rc comes complete with 50' of 3/8" diameter synthetic rope. Features include gloss red paint; a rugged, 360-degree swivel hook and thimble; an aluminum hawse fairlead; extreme duty winch sealing; and a "Ballistic Nylon" Sliding Sleeve that provides extra protection against abrasion and wear. |
| |
| Compact. Tough. An outstanding value for trucks, sport utility vehicles and Jeeps. The M8000, with its 4.8-hp Series Wound motor and 3-stage planetary geartrain, packs 8,000 lbs. of pulling power to get the job done. Available with 100' of wire rope and roller fairlead. Pulls a fast 8 ft. per minute at rated load. |
| |
| A long-time best seller, the XD9000's compact body and separate control pack lets it work effectively in very tight spaces. It uses the 4.6 hp Series Wound™ motor and three-stage planetary gearing offered on most of our winches, so torque and line speed are outstanding. A quiet, double-durable winch, pure and simple.
Wireless Remote Control System can be added which is also available separately. |
| |
| ADDITIONAL RESCUE REBATE
Save Up To $150 On WARN Winches
Now through December 31st, 2009
The 9.5ti Multi-Mount packs 9500lbs of portable pulling capacity into a massive 12.5lb aluminum die-cast body. The new shape not only looks great, but sheds the elements like no other winch on the market: seals at the key points give extreme-duty water resistance. A Gen II Bosch motor delivers just the right balance between torque and speed. Plus another Warn Industries first - operator feedback - the thermometric indicator gives the operator information about motor temperature during the winching operation.
Wireless Remote Control System can be added which is also available separately. |
| |
| With 9,500 lbs of pulling power, the longest duty cycle and fastest line speed of any WARN winch under load, the 9.5 XP delivers extreme performance! The 9.5 XP winch features, High Output Parallel Series Wound winch motor that's the strongest and most durable in the industry. The 6 hp motor, 3-stage planetary gearing and continuous duty control pack work in sync to tackle the most demanding pulls. Full face contact drum seals, motor and end housing gaskets deliver extreme-duty water resistance. |
| |
| ADDITIONAL RESCUE REBATE
Save Up To $150 On WARN Winches
Now through December 31st, 2009
With 9,500 lbs of pulling power, the longest duty cycle and fastest line speed of any WARN winch under load, the 9.5 XP delivers extreme performance! The 9.5 XP winch features, High Output Parallel Series Wound winch motor that's the strongest and most durable in the industry. The 6 hp motor, 3-stage planetary gearing and continuous duty control pack work in sync to tackle the most demanding pulls. Full face contact drum seals, motor and end housing gaskets deliver extreme-duty water resistance. |
| |
| For heavy-duty winching needs, this winch is a champion workhorse. Big torque, power and quick no-load retrieval speed is 30 feet per minute. Its design is low profile, so it'll fit where you want. And it's powered by the 4.6-hp Series Wound™ motor and our proven three-stage planetary gear train. With 125 ft. of 3/8" wire rope, the WARN M12000 can solve most any pulling problem.
Wireless Remote Control System can be added which is also available separately. |
| |
| ADDITIONAL RESCUE REBATE
Save Up To $150 On WARN Winches
Now through December 31st, 2009
WARN Industries has taken MOSFET (Metal-Oxide-Semiconductor Field-Effect-Transistor) technology and put it to work for serious off-roaders. The 9.5si MOSFET control module eliminates the solenoid pack and its electro-mechanical functions. Operating temperatures from -40°F to +180°F won't faze it. Voltage drop to the winch is minimal for more efficient operation and low heat gain. With it's extreme sealing system and the 12.5 lb aluminum die-cast body, the 9.5si is the winch for the discriminating user who requires the ultimate in reliability, durability and control.
Wireless Remote Control System can be added which is also available separately. |
| |
| ADDITIONAL RESCUE REBATE
Save Up To $150 On WARN Winches
Now through December 31st, 2009
The 16.5ti features the full diagnostic ability of WARN Thermometric technology, plus the extreme sealing, durability and reliability that the WARN ti-series of winches are known for. The new, more efficient design delivers faster line speeds and lower amp draw. It's beefed up where needed, and features a new aluminum solenoid housing cover. Not to mention 90 feet of aircraft grade, 7/16" wire rope. |
| |
|
When you work hard enough to need a really big truck, you'll want a winch with enough capacity to get the job done. The WARN M15000 winch boasts high strength carrier plates to handle the gear train stresses of a 15,000lb load. The gear ratio is 315:1, with 90 feet of 7/16" wire rope equipped with a large latched hook. The control pack is designed for generous clearance and ease of access. |
| |
| Deep Fording HMMWV Winch and Mounting Kit
All-In-One unit installs easily on the Military H1 |
| |
| The 9.5ti Multi-Mount packs 9500lbs of portable pulling capacity into a massive 12.5lb aluminum die-cast body. The new shape not only looks great, but sheds the elements like no other winch on the market: seals at the key points give extreme-duty water resistance. A Gen II Bosch motor delivers just the right balance between torque and speed. Plus another Warn Industries first - operator feedback - the thermometric indicator gives the operator information about motor temperature during the winching operation. |
| |
» Click here for details
