 | This is the premium cleaner kit for your Airaid Air Intake System. It is essential for a high-flow filter to remain clean and free of debris to keep maximum air flow into your engine. Tune-Up kit is simple to use, just 3 easy steps:
(1) spray cleaner on filter and let soak for about 10 minutes,
(2) Allow the filter to dry, then finally
(3) apply performance oil into each pleat.
Complete instructions included. |
| |
| K&N Recharger® kits contain K&N air filter cleaner and air filter oil for recharging any K&N Filtercharger® Air Filter. Restores air flow efficiency so your Filtercharger performs like new!
|
| |
| Air flow test have proven that cotton-gauze filters flow much more air than paper element filters do. However, when they get dirty, they can clog up and limit air flow. This is one reason why you should clean your air filter with Volant's filter cleaner kit. The kit contains Volant's filter cleaner that loosens and removes dirt trapping capabilities. Volant's filter oil contains a blue dye to easily see where the oil has saturated into the filter, eliminating the common mistake of over oiling the filter. When used correctly, Volant's filter cleaner kit can maintain the life and performance of your Volant high-flow filter and Cool Flow air intake system. |
| |
| A six-step maintenance system designed to recharge any K&N Filtercharger® Air Filter. Restores air flow efficiency so your Filtercharger performs like new! |
| |
| We suggest that your aFe filter be cleaned every 30,000-50,000 miles. If, however, you're driving in dusty and dirty conditions, you should clean it more often. |
| |
| Volant, a leader in aftermarket intake design didn't cut any corners when it developed this Challenger kit. The cross-link polyethylene air box and duct work is engineered to specific of the Wrangler. It insulates and protects the filter from pulling hot air from the engine compartment, thus, increasing horsepower. The air tube features a less restrictive air passage to the throttle body with larger diameters and smooth transitions for maximum horsepower and a quicker throttle response. Kits include a cleanable and reusable filter element that reduces air restriction to increases air flow. High performance silicon connectors provide flexibility, strength and thermal stability and marine grade stainless steel clamps provide strong air tight seals. |
| |
| What's so great about cold air intakes? Cold air is much denser than hot, humid air and holds more oxygen. More oxygen going into an engine equals more combustion, thus more power. The Mopar Cold Air
Intake System increases airflow by as much as 20%, boosting torque up to ten lbs., and power by nearly ten horsepower. All of this while improving fuel economy (one to two mpg depending on driving style). Air filters are high-flow and low-restriction, offer better throttle response and increased filtration and horsepower. Filters are made of a new dry media material which is washable and reusable. Do not oil. |
| |
| Services all of Mopar's washable/oilable filters for both the Mopar cold air induction systems and Mopar Performance O.E. Replacement Air Filters. |
| |
| Constructed with 100% polyurethane on all four sides, this high flow, oiled OE replacement performance filter will out flow stock paper filter for improved horsepower and torque. Five layers of progressively finer mesh cotton gauze media provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall open evenly space pleats provide excellent dust holding capacity for longer service cycle between cleanings. Integrated urethane bump seal insures tight, no leak seal over the life of the filter. |
| |
| Constructed with 100% polyurethane on all four sides, this high flow "oil-free" OE replacement performance filter will outflow stock paper filter for improved horsepower and torque. Two layers of progressively finer mesh synthetic media provide maximum convenience and easy maintenance. Washable and reusable for multiple cleaning cycles, the tall open evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Integrated urethane bump seal insures tight, no leak seal over the life of the filter. |
| |
| The Powr-Flo spacers bore is designed to increase the velocity of the air flow into the intake manifold .By delivering the air with more velocity it allows more air into the combustion chamber for a denser air charge. The design results in improved throttle response and impressive power gains in the mid range and top end. In addition, the increased air flow results in improved overall fuel efficiency. Simple, bolt-on installation with no other vehicle modifications required. Compatible with other aftermarket upgrades such as computer upgrades, cold air intakes, free flow exhaust systems, etc. Precision machined out of billet aluminum by JET's in house CNC machine shop. |
| |
| Heat up your ride with a steady flow of cold air! This bolt-on system is designed to allow cooler outside air through a directional cone filter and funnel directly into the intake manifold. This kit provides noticeable horsepower and torque gains under varying atmospheric conditions. Kit includes all mounting hardware and a dry-media, washable/reusable dry media filter. Do not oil. |
| |
| Constructed with factory tight seals, engineering-level polyurethane, deep four-ply pleats of oiled cotton gauze and two layers of aluminum screen. This filter offers high flow and low restriction, better throttle response, and increased filtration and horsepower. Filters are washable and reusable and come pre-oiled. |
| |
| Enclosed in a durable 16 gauge, powder-coated heat shield; this air intake system features a washable/reusable conical air filter that improves airflow for increased horsepower and torque. This intake system also features a heat-insulating molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. One-piece heat shield requires little or no assembly and the filter is constructed with 100% polyurethane for long life and multiple cleaning cycles. |
| |
| Enclosed in a durable 16 gauge, powder-coated heat shield; this air intake system features a washable/reusable conical air filter that improves airflow for increased horsepower and torque. This intake system also features a heat-insulating molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. One-piece heat shield requires little or no assembly and the filter is constructed with 100% polyurethane for long life and multiple cleaning cycles. |
| |
