WARN® 9.5XP Winch For WARN® H2 Bumper - SuperTruck Essentials

Home » Winches, Recovery & Safety Gear » Winches » WARN® 9.5XP Winch For WARN® H2 Bumper

WARN® 9.5XP Winch For WARN® H2 Bumper

^$1307.99

SuperTruck Essentials Part No: 92134.300
Manufacturer Part No: 69502

With 9,500 lbs of pulling power, the longest duty cycle and fastest line speed of any WARN winch under load, the 9.5 XP delivers extreme performance! The 9.5 XP winch features, High Output Parallel Series Wound winch motor that's the strongest and most durable in the industry. The 6 hp motor, 3-stage planetary gearing and continuous duty control pack work in sync to tackle the most demanding pulls. Full face contact drum seals, motor and end housing gaskets deliver extreme-duty water resistance. more...

Limited Lifetime Warranty.

Installation Notes

Install Time: 1-2 Hours

Need tools? Click here

Fits these Vehicles

02-08 Hummer H2

Parts Included

100', 5/16" diameter (30m, 8mm diam.) Wire Rope
12V 6 hp, High Output Parallel Series Wound
Hawse Fairlead
Remote switch, 12' (3.7m) lead
Spring- loaded control switches
Automatic Direct Drive Cone Brake
3-Stage Planetary with a 156:1 ratio
Sliding Ring Gear Clutch for freespooling
Weather-shielded solenoids
Color-coded 2 gauge, 72" cables and connectors.

Product Details

The fast, powerful WARN 9.5xp is designed for the serious off-roader who demands a winch that will perform under the most extreme conditions in the world. With 9,500 lbs. of pulling power, the longest duty cycle and fastest line speed of any WARN winch under load, the 9.5xp delivers extreme performance that eats up the competition-even in competition.

The 9.5xp winch features an all new, High Output Parallel Series Wound winch motor that's the strongest and most durable in the industry. The 6 hp motor, 3-stage planetary gearing and continuous duty control pack work in sync to tackle the most demanding pulls. Full face contact drum seals, motor and end housing gaskets deliver extreme-duty water resistance. A high gloss, chip resistant powder coat finish over chromate coated alloys affords superior corrosion resistance.

9.5XP SPECS/PART NUMBERS

Part Number: PN 68502 (12V DC)

Rated Line Pull: 9500 lbs. (4310 kgs.) single-line

Motor: 12V 6 hp, High Output Parallel Series Wound

Remote Control: Remote switch, 12' (3.7m) lead, S2 elements, integrated flashlight

Geartrain: 3-Stage Planetary

Gear Ratio: 156:1

Lubrication: Aeroshell #17

Clutch (freespooling): Sliding Ring Gear

Brake: Automatic Direct Drive Cone

Wire Rope: 100', 5/16" diameter (30m, 8mm diam.)

Fairlead: Roller

Recommended Battery: 650 CCA minimum for winching

Battery Leads: 2 gauge, 72" (1.83m)

Finish: Chromate with high-gloss dark gray powder coat

Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm)

Weight: 87 lbs. (39.5 kgs.)

12V DC PERFORMANCE SPECS
Line Pull Lbs.(Kgs.)	Line Speed FT./min(M/min.)	Motor Current	Pull by layer layer/Lbs(Kgs.)
0	38(11.6)	70 amps	1/9500(4313)
2000(910)	16.8(5.1)	175 amps	2/8650(4927)
4000(1818)	12.8(3.9)	262 amps	3/7920 (3595)
6000(2720)	10.1(3.1)	335 amps	4/7400(3359)
8000(3630)	8.8(2.7)	425 amps	5/6940(3150)
9500(4310)	7.6(2.3)	480 amps

Above performance specs are based on first layer of drum

Winch Dimensions: 22.7" L. x 6.3" D. x 7.7" H.
(577mm L. x 160mm D. x 196 mm H)

Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm)

Dual Stack Exhaust Kits

Westin Sidebars

Jeep Parts

Challenger Parts

Camaro Parts

©1995-2010, Quadratec, Inc. All rights reserved. This entire site with its content is copyright protected. All images are invisibly watermarked and cannot be used without explicit agreement from SuperTruck Essentials.

The terms Quadratec and Essentials are Registered Trademarks of Quadratec Incorporated, Registered in U.S. Patent and Trademark Office. All manufacturersÕ names, numbers, symbols and descriptions are used for reference purposes only, and it is not implied that any part listed is the product of these manufacturers or approved by any of these manufacturers.

All manufacturers' names, numbers, symbols and descriptions are used for reference purposes only. It is not implied that any part listed is the product of these manufacturers or approved by any of these manufacturers. Ford, F-Series, F-100, F-150, F-250 the Blue Oval Logo, and Super Duty are trademarks of the Ford Motor Company. The terms Dodge, Ram, Dakota, and the Ram Head logo are trademarks of Chrysler LLC. GM, Chevrolet, Chevy, Silverado, C/K, Z71, GMC, Sierra, are trademarks of General Motors. SuperTruck Essentials is not affiliated with the Ford Motor Company, General Motors, Chrysler LLC or NASCAR. NASCAR is a registered trademark used for identification purposes only throughout this web site.

Disclaimer: We have made every effort to ensure that the information in this web site is correct; however, any typographical or printing errors, prices or specifications (subject to change) will be corrected without prior notice.

SuperTruck Essentials is a Quadratec company.
Visit our Jeep Parts and Jeep Accessories store at Quadratec.com
Visit our FJ Cruiser Parts, Tacoma Parts & Tundra Parts store.